How far can you drive on 4 32 tread? (2023)

Is 4 32 a good tread depth?

The tire tread depth gauge measures in 32nds of an inch. Good tire tread depth will be 6/32 or deeper. If the depth is 4/32, you should start thinking of replacing your tires and getting new ones. 2/32 or less means that you should change your tires ASAP.

(Video) Tested: How Much Tread Depth Do You Need? I Tire Rack
(Tire Rack)
Do I need to replace tires at 4 32?

Put George Washington's head into one of the big grooves. If the top of his head is flush with the tread, you have about 4⁄32 inch of tread left, meaning you have some grip remaining for rainy or snowy conditions. That's the time when you should start shopping for new tires.

(Video) LEARN How to MEASURE Tire Life
(ManiZilla's ToolBox)
How long will 5 32 tread last?

Normally, used tires last 2-5 years if bought in adequate condition. A 2-year-old tire with no damage, patches, uneven wear, and with about 8/32” tread left, may last for good 5 years. A 4-year-old tire with 5/32” tread left, and without any significant plugs or cuts, may last a further 2 years.

(Video) Tread Depth & Tire Condition, Part 1 - Wheel End Wednesday
(CRST The Transportation Solution, Inc.)
What percentage is 4 32 tire tread?

Then usable tread depth is compared to remaining tread depth in order to calculate tread wear percentages. For example, a tire that started with 10/32" of original tread depth and has worn off 4/32" (down to 6/32" of remaining tread depth) is 50% worn.

(Video) How to Measure Tire Tread With a Penny (Or a Quarter)
(The Ice Cold Garage)
When should I replace my 32nd tire?

Check For Tread Depth

To meet legal safety standards in the U.S., a tire's tread needs to be at least 2/32” deep. If the tires do not meet the 2/32” standard or are approaching not meeting it, you should replace your tires.

(Video) What is the minimum tire tread depth in Canada?
(Ask About APPS)
What tread depth is stopping distance?

At the legal minimum tread depth of 1.6mm, the stopping distance is increased by 36.8% on the hot rolled asphalt and 44.6% on the smooth concrete. From the independent research, RoSPA recommends that tyres are changed once the tread reaches 3mm in depth.

(Video) How to know when it's time for new tires
(ABC News)
How many 32nds on a tire is safe?

The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. The idea of the penny test is to check whether you've hit the 2/32” threshold.

(Video) How to Measure Tire Tread Depth on your Car & Why it's Important
(4DIYers)
Do tires need to be replaced at 3 32?

Low tire tread: Many mechanics recommend replacement when your vehicle reaches between 3/32 and 4/32 of an inch. This is especially true if you live in an area with severe climates to prevent hydroplaning and other inclement weather risks. Good tread levels: New tires often have 11/32 of an inch of tread.

(Video) How to measure tire tread depth | How to use a digital tread depth gauge
(Frakking Creations)
Should I replace my tires at 5 32?

A tire with a half-tread depth usually has 5/32 to 6/32 of an inch remaining. Tires are worn-out when they reach 2/32 of an inch, but you don't need to go that low to see a substantial decline in performance on slick (wet, snowy, or icy) surfaces.

(Video) How to Check Your Tire Tread Depth with a Gauge or a Penny
(1A Auto: Repair Tips & Secrets Only Mechanics Know)
What if my tire tread is 5 32?

6/32” Your tire's tread depth is sufficient for 3-seasons but nearing minimum for a winter tire. 5/32” If wet roads are a concern, consider replacing your tires. 4/32” – 3/32” Seriously consider replacing your tires as soon as possible. If it's a winter tire, 4/32” is the minimum.

(Video) Check Tire Tread Depth
(FIX IT Home Improvement Channel)

Is a 5 32 tire still thick?

5/32” is still sufficient in most cases, but tires may start to lose traction on wet roads. 4-3/32” is the level at which you should think about choosing a new tire/set of tires. 2/32” is the average legal minimum for tread depth; at this level your tires are considered bald and unsafe.

(Video) How far can you drive on a Dummy/Spare Tire?? Here's my story.
(Fixing With Passion)
Can I drive on 3 32 tires?

The minimum legal limit is 2/32 of an inch. This doesn't mean that tires are perfectly safe if they have 3/32 left of tread. This is simply the limit at which you won't pass your state safety inspection. Your tires become incrementally less safe as the tread wears down.

How far can you drive on 4 32 tread? (2023)
Should I replace tires at 5 32?

A tire with a half-tread depth usually has 5/32 to 6/32 of an inch remaining. Tires are worn-out when they reach 2/32 of an inch, but you don't need to go that low to see a substantial decline in performance on slick (wet, snowy, or icy) surfaces.

What is acceptable tread depth?

The U.S. Department of Transportation recommends replacing tires when they reach 2/32”, and many states legally require tires to be replaced at this depth. The idea of the penny test is to check whether you've hit the 2/32” threshold.

What is considered poor tread depth?

Once your tire tread is below 1/8th of an inch of rubber, most industry experts suggest preparing to replace. If you are down to 1/16th of an inch, your tires are considered worn out, and most states require immediate replacement.

Should I replace tires at 3 32?

Low tire tread: Many mechanics recommend replacement when your vehicle reaches between 3/32 and 4/32 of an inch. This is especially true if you live in an area with severe climates to prevent hydroplaning and other inclement weather risks. Good tread levels: New tires often have 11/32 of an inch of tread.

You might also like
Popular posts
Latest Posts
Article information

Author: Ray Christiansen

Last Updated: 12/05/2023

Views: 6404

Rating: 4.9 / 5 (49 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Ray Christiansen

Birthday: 1998-05-04

Address: Apt. 814 34339 Sauer Islands, Hirtheville, GA 02446-8771

Phone: +337636892828

Job: Lead Hospitality Designer

Hobby: Urban exploration, Tai chi, Lockpicking, Fashion, Gunsmithing, Pottery, Geocaching

Introduction: My name is Ray Christiansen, I am a fair, good, cute, gentle, vast, glamorous, excited person who loves writing and wants to share my knowledge and understanding with you.